Просмотр полной версии : Проблема с Iptables
Собстно сабж
iptables -t nat -A POSTROUTING -p tcp --dport 8888 -j DNAT --to-destination 1.1.1.1 --to-ports 80
Почему оно не работает? Подскажите...
Зы: срочно, ответ нужен в течении полутора часов..
Заранее спасибо...
DNAT
This target is only valid in the nat table, in the PREROUTING and OUTPUT chains, and user-defined chains which are only called from those chains. It specifies that the destination address of the packet should be modified (and all future packets in this connection will also be mangled), and rules should cease being examined. It takes one option:
--to-destination <ipaddr>[-<ipaddr>][:port-port]
which can specify a single new destination IP address, an inclusive range of IP addresses, and optionally, a port range (which is only valid if the rule also specifies -p tcp or -p udp). If no port range is specified, then the destination port will never be modified.
iptables -t nat -A POSTROUTING -p tcp --dport 8888 -j DNAT --to-destination 1.1.1.1:80
Пробуй)
vBulletin® v3.8.14, Copyright ©2000-2026, vBulletin Solutions, Inc. Перевод: zCarot