Nokia 1610/1611
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#170602112302# shows the SW version.

Software
Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX - older version V 4.19
Latest software version on Nokia 1611: V 4.03 NHE-5SX



Nokia 3110
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#7780# restores Factory Settings..(Memory, language, counters not included)

*#3110# for checking the phone's software (SW) - called firmware revision information.
*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)
7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT SAVED'...)
7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
(eg. if broken) with 6110 u can transfer all data via IRport. (Confirm Transfer?)


Nokia 3210
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.


*#92702689# - takes you to a secret menu with 6 choices
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes u capebel of transferring user data if u have the gear for it
6) shows how many houres the phone has been on


Nokia 5110/Nokia 6110
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# for checking the phones software (SW) - called firmware revision information.
*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time) This code doesn't work on SW version 4.59.

*#92702689# [*#war0anty#] Warranty code.
You don't need the warranty-codes any more - you can
just scroll through the information like in any other menu. It has the the
same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:
1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY)
you can here set the Purchasing Date (Warning: You can only do this once -
so be careful what you write...)
4: Displays the date of the last repairment - if found (0000)
6: Transfers ALL phone numbers, pictures, sounds from one phone to another (eg. if broken) with 6110 u can transfer all data via IRport. (Transfer user data?)


Software UPDATED / NEW

Type : NSE-1
LASTEST Version 05.24 (xx-xx-99)
-An Updated GSM operator's List

Nokia 6110
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# for checking the phones software (SW) - called firmware revision information.
*#6110# Try this code if the above code doen't work.
On SW-Version 5.24 (only this version) you can check if the Sim-Clock can be Stopped
with this code. (Sim-clock-stop is a kind of standby mode which will save battery time)

*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Warranty code.
You don't need the warranty-codes any more - you can
just scroll through the information like in any other menu. It has the the
same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:
1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY)
you can here set the Purchasing Date (Warning: You can only do this once -
so be careful what you write...)
4: Displays the date of the last repairment - if found (0000)
6: Transfers ALL phone numbers, pictures, sounds from one phone to another
(eg. if broken) 6110 can also transfer all data via IRport (Confirm Transfer?)


Software

Type: NSE-3

Nokia 7110
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%
Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

*#92702689# - takes you to a secret menu with 6 choices
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes u capebel of transferring user data if u have the gear for it
6) shows how many houres the phone has been on


Nokia 8110i
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#8110# for checking the phones software (SW) - called firmware revision information.
*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)
7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT SAVED'...)
7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY
(Warning: You can only do this once - So be careful what you write...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another (eg. if broken) with 6110 u can transfer all data via IRport. (Confirm transfer?)


Nokia 8210/Nokia 8810
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# for checking the phones software (SW)
*#6110# Try this code if the above code doen't work.

*#92702689# [*#war0anty#] Warranty code.
You don't need the warranty-codes any more - you can
just scroll through the information like in any other menu. It has the the
same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:
1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY)
you can here set the Purchasing Date (Warning: You can only do this once -
so be careful what you write...)
4: Displays the date of the last repairment - if found (0000)
6: Transfers ALL phone numbers, pictures, sounds from one phone to another
(eg. if broken) 6110 can also transfer all data via IRport (Confirm Transfer?)


Nokia 8850
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version

Nokia 9110
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.