ANTICHAT.XYZ    VIDEO.ANTICHAT.XYZ    НОВЫЕ СООБЩЕНИЯ    ФОРУМ  
Баннер 1   Баннер 2
Antichat снова доступен.
Форум Antichat (Античат) возвращается и снова открыт для пользователей. Здесь обсуждаются безопасность, программирование, технологии и многое другое. Сообщество снова собирается вместе.
Новый адрес: forum.antichat.xyz
Вернуться   Форум АНТИЧАТ > Безопасность и Уязвимости > Безопасность > Soft - *nix
   
Ответ
 
Опции темы Поиск в этой теме Опции просмотра

help proftpd
  #1  
Старый 30.05.2009, 22:04
Аватар для F4R
F4R
Banned
Регистрация: 20.06.2008
Сообщений: 296
Провел на форуме:
1385078

Репутация: 126
Отправить сообщение для F4R с помощью ICQ
По умолчанию help proftpd

пытался настроить фпт сервере по статье _http://www.xima4.com/?p=470

но при заходе пишет логин\пасс не верны ( дайте плиз норм конфиг только без анонимуса
или в чём трабла?
 
Ответить с цитированием

  #2  
Старый 31.05.2009, 00:00
Аватар для AlexSatter
AlexSatter
Постоянный
Регистрация: 29.01.2009
Сообщений: 333
Провел на форуме:
1168802

Репутация: 298
По умолчанию

Код:
# For more informations about Proftpd configuration
# look at : http://www.proftpd.org/
#
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use.  It establishes a single server
# and a single anonymous login.  It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.

ServerName                      "ProFTPD Default Installation"
ServerType                      standalone
DefaultServer                   on
ScoreboardFile          /var/run/proftpd/proftpd.scoreboard

# Port 21 is the standard FTP port.
Port                            21

# Use IPv6 support by default.
#UseIPv6                                on

# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask                           022


# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances                    30

CommandBufferSize       512

# Set the user and group under which the server will run.
User                            nobody
Group                           nogroup

# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
DefaultRoot ~

# Normally, we want files to be overwriteable.
AllowOverwrite          on

<Limit SITE_CHMOD>
  AllowAll
</Limit>

# A basic anonymous configuration, no upload directories.  If you do not
# want anonymous users, simply delete this entire <Anonymous> section.

#########################################################################
#                                                                       #
# Uncomment lines with only one # to allow basic anonymous access       #
#                                                                       #
#########################################################################

#<Anonymous ~ftp>
#   User                                ftp
#   Group                               ftp

  ### We want clients to be able to login with "anonymous" as well as "ftp"
  # UserAlias                   anonymous ftp

  ### Limit the maximum number of anonymous logins
  # MaxClients                  10
#########################################################################

#<Anonymous ~ftp>
#   User                                ftp
#   Group                               ftp

  ### We want clients to be able to login with "anonymous" as well as "ftp"
  # UserAlias                   anonymous ftp

  ### Limit the maximum number of anonymous logins
  # MaxClients                  10

  ### We want 'welcome.msg' displayed at login, and '.message' displayed
  ### in each newly chdired directory.
  # DisplayLogin                        welcome.msg
  # DisplayFirstChdir           .message

  ### Limit WRITE everywhere in the anonymous chroot
  # <Limit WRITE>
  #   DenyAll
  # </Limit>
#</Anonymous>
пользователи обычные системные, без шелла. /sbin/nologin

chroot так же работает.
 
Ответить с цитированием

  #3  
Старый 31.05.2009, 08:07
Аватар для F4R
F4R
Banned
Регистрация: 20.06.2008
Сообщений: 296
Провел на форуме:
1385078

Репутация: 126
Отправить сообщение для F4R с помощью ICQ
По умолчанию

sps работает!
а как туда добавить что бы были доступны директории из /usr/local..../... ?
 
Ответить с цитированием

  #4  
Старый 31.05.2009, 09:23
Аватар для AlexSatter
AlexSatter
Постоянный
Регистрация: 29.01.2009
Сообщений: 333
Провел на форуме:
1168802

Репутация: 298
По умолчанию

DefaultRoot ~
включает по умолчанию всем chroot (т.е. доступ к свеой дире, и не выше)

чтобы получить дополнительную информацию, советую прочитать официальную документацию: http://proftpd.org/docs/
там же и множество примеров, на любой случай жизни.
 
Ответить с цитированием
Ответ



Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
ProFTPD help forik Уязвимости 10 12.12.2008 22:40
Уязвимость в ProFTPD »Atom1c« *nix 3 19.12.2006 19:20
sql в ProFTPD Майор С/С++, C#, Delphi, .NET, Asm 19 12.07.2006 23:20



Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
 


Быстрый переход




ANTICHAT.XYZ