HOME FORUMS MEMBERS RECENT POSTS LOG IN  
× Авторизация
Имя пользователя:
Пароль:
Нет аккаунта? Регистрация
Баннер 1   Баннер 2
НОВЫЕ ТОРГОВАЯ НОВОСТИ ЧАТ
loading...
Скрыть
Вернуться   ANTICHAT > БЕЗОПАСНОСТЬ И УЯЗВИМОСТИ > Электроника и Фрикинг
Перезагрузить страницу OsmocomBB: Глубокое погружение в возможности программной реализации GSM-стека
   
Ответ
Страница 14 из 24 « Первая < 4 10 11 12 13 14 15 16 17 18 > Последняя »
 
Опции темы Поиск в этой теме Опции просмотра

  #131  
Старый 07.01.2019, 00:08
kuzmich9023
Новичок
Регистрация: 05.01.2019
Сообщений: 0
С нами: 3870507

Репутация: 0
По умолчанию
Подпаялся сейчас немного по другому и пульнул код:

Код:


Код:
~/osmocombb/master/src$ sudo host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor -c /target/firmware/board/compal_e88/layer1.highram.bin
got 1 bytes from modem, data looks like: 04  .
got 1 bytes from modem, data looks like: f0  .
got 1 bytes from modem, data looks like: 1b  .
got 4 bytes from modem, data looks like: f6 02 00 41  ...A
got 1 bytes from modem, data looks like: 01  .
got 1 bytes from modem, data looks like: 40  @
Received PROMPT1 from phone, responding with CMD
read_file(chainloader): file_size=32, hdr_len=4, dnload_len=39
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 43  C
Received PROMPT2 from phone, starting download
handle_write(): 39 bytes (39/39)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 03  .
got 1 bytes from modem, data looks like: 42  B
Received DOWNLOAD ACK from phone, your code is running now!
Enabled Compal ramloader -> Calypso romloader chainloading mode
Received ident ack from phone, sending parameter sequence
opening file: No such file or directory
после этого труба не включается. Приходится скидывать батарею.
 
Ответить с цитированием

  #132  
Старый 07.01.2019, 00:12
House26
Новичок
Регистрация: 13.07.2018
Сообщений: 0
С нами: 4124485

Репутация: 0
По умолчанию
Цитата:

kuzmich9023 сказал(а):

Подпаялся сейчас немного по другому и пульнул код:

Код:


Код:
~/osmocombb/master/src$ sudo host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor -c /target/firmware/board/compal_e88/layer1.highram.bin
got 1 bytes from modem, data looks like: 04  .
got 1 bytes from modem, data looks like: f0  .
got 1 bytes from modem, data looks like: 1b  .
got 4 bytes from modem, data looks like: f6 02 00 41  ...A
got 1 bytes from modem, data looks like: 01  .
got 1 bytes from modem, data looks like: 40  @
Received PROMPT1 from phone, responding with CMD
read_file(chainloader): file_size=32, hdr_len=4, dnload_len=39
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 43  C
Received PROMPT2 from phone, starting download
handle_write(): 39 bytes (39/39)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 03  .
got 1 bytes from modem, data looks like: 42  B
Received DOWNLOAD ACK from phone, your code is running now!
Enabled Compal ramloader -> Calypso romloader chainloading mode
Received ident ack from phone, sending parameter sequence
opening file: No such file or directory
после этого труба не включается. Приходится скидывать батарею.

А если так
sudo host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor -c target/firmware/board/compal_e88/layer1.highram.bin
 
Ответить с цитированием

  #133  
Старый 07.01.2019, 00:22
kuzmich9023
Новичок
Регистрация: 05.01.2019
Сообщений: 0
С нами: 3870507

Репутация: 0
По умолчанию
Цитата:

House26 сказал(а):

А если так
sudo host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor -c target/firmware/board/compal_e88/layer1.highram.bin

вроде попёрло)))
на экране :
Layer1
osmocom-bb

Код:


Код:
~/osmocombb/master/src$ sudo host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor -c target/firmware/board/compal_e88/layer1.highram.bin

got 1 bytes from modem, data looks like: 04  .
got 1 bytes from modem, data looks like: f0  .
got 1 bytes from modem, data looks like: 1b  .
got 4 bytes from modem, data looks like: f6 02 00 41  ...A
got 1 bytes from modem, data looks like: 01  .
got 1 bytes from modem, data looks like: 40  @
Received PROMPT1 from phone, responding with CMD
read_file(chainloader): file_size=32, hdr_len=4, dnload_len=39
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 43  C
Received PROMPT2 from phone, starting download
handle_write(): 39 bytes (39/39)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 03  .
got 1 bytes from modem, data looks like: 42  B
Received DOWNLOAD ACK from phone, your code is running now!
Enabled Compal ramloader -> Calypso romloader chainloading mode
Received ident ack from phone, sending parameter sequence
read_file(target/firmware/board/compal_e88/layer1.highram.bin): file_size=58820, hdr_len=0, dnload_len=58823
Received parameter ack from phone, starting download
Finished, sent 59 blocks in total
Received branch ack, your code is running now!
battery_compal_e88_init: starting up

OsmocomBB Layer 1 (revision osmocon_v0.0.0-2290-g5caa4ac)
======================================================================
Device ID code: 0xb4fb
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: 2cd61a22f00211b1
======================================================================
REG_DPLL=0x2413
CNTL_ARM_CLK=0xf0a1
CNTL_CLK=0xff91
CNTL_RST=0xfff3
CNTL_ARM_DIV=0xfff9
======================================================================
Power up simcard:
Assert DSP into Reset
Releasing DSP from Reset
Setting some dsp_api.ndb values
Setting API NDB parameters
DSP Download Status: 0x0001
DSP API Version: 0x0000 0x0000
Finishing download phase
DSP Download Status: 0x0002
DSP API Version: 0x3606 0x0000
LOST 831!
BAT-ADC: 605   6   0   0 1023 372 384 218 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 604   6   0   0 1023 373 384 218 
    Charger at 51 mV.
    Battery at 4129 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 373 385 220 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 372 384 218 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 372 383 276 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
key=12 pressed
key=12 released
BAT-ADC: 605   6   0   0 1023 372 382 272 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
key=12 pressed
key=12 released
key=16 pressed
key=16 released
BAT-ADC: 604   6   0   0 1023 375 385 220 
    Charger at 51 mV.
    Battery at 4129 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 371 382 272 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 603   6   0   0 1023 371 382 272 
    Charger at 51 mV.
    Battery at 4122 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 371 382 272 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 370 382 272 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 373 383 276 
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
сейчас скину фото как надо замкнуть контакты на плате мобилы)))
Подскажите в чём суть таких манипуляций с файлами в терминале?
 
Ответить с цитированием

  #134  
Старый 07.01.2019, 00:29
House26
Новичок
Регистрация: 13.07.2018
Сообщений: 0
С нами: 4124485

Репутация: 0
По умолчанию
Цитата:

kuzmich9023 сказал(а):

вроде попёрло)))
на экране :
Layer1
osmocom-bb

Код:


Код:
~/osmocombb/master/src$ sudo host/osmocon/osmocon -p /dev/ttyUSB0 -m c123xor -c target/firmware/board/compal_e88/layer1.highram.bin

got 1 bytes from modem, data looks like: 04  .
got 1 bytes from modem, data looks like: f0  .
got 1 bytes from modem, data looks like: 1b  .
got 4 bytes from modem, data looks like: f6 02 00 41  ...A
got 1 bytes from modem, data looks like: 01  .
got 1 bytes from modem, data looks like: 40  @
Received PROMPT1 from phone, responding with CMD
read_file(chainloader): file_size=32, hdr_len=4, dnload_len=39
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 43  C
Received PROMPT2 from phone, starting download
handle_write(): 39 bytes (39/39)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 03  .
got 1 bytes from modem, data looks like: 42  B
Received DOWNLOAD ACK from phone, your code is running now!
Enabled Compal ramloader -> Calypso romloader chainloading mode
Received ident ack from phone, sending parameter sequence
read_file(target/firmware/board/compal_e88/layer1.highram.bin): file_size=58820, hdr_len=0, dnload_len=58823
Received parameter ack from phone, starting download
Finished, sent 59 blocks in total
Received branch ack, your code is running now!
battery_compal_e88_init: starting up

OsmocomBB Layer 1 (revision osmocon_v0.0.0-2290-g5caa4ac)
======================================================================
Device ID code: 0xb4fb
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: 2cd61a22f00211b1
======================================================================
REG_DPLL=0x2413
CNTL_ARM_CLK=0xf0a1
CNTL_CLK=0xff91
CNTL_RST=0xfff3
CNTL_ARM_DIV=0xfff9
======================================================================
Power up simcard:
Assert DSP into Reset
Releasing DSP from Reset
Setting some dsp_api.ndb values
Setting API NDB parameters
DSP Download Status: 0x0001
DSP API Version: 0x0000 0x0000
Finishing download phase
DSP Download Status: 0x0002
DSP API Version: 0x3606 0x0000
LOST 831!
BAT-ADC: 605   6   0   0 1023 372 384 218
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 604   6   0   0 1023 373 384 218
    Charger at 51 mV.
    Battery at 4129 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 373 385 220
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 372 384 218
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 372 383 276
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
key=12 pressed
key=12 released
BAT-ADC: 605   6   0   0 1023 372 382 272
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
key=12 pressed
key=12 released
key=16 pressed
key=16 released
BAT-ADC: 604   6   0   0 1023 375 385 220
    Charger at 51 mV.
    Battery at 4129 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 371 382 272
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 603   6   0   0 1023 371 382 272
    Charger at 51 mV.
    Battery at 4122 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 371 382 272
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 370 382 272
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
    Battery range is 3199..3999 mV.
    Battery full at 468 LSB .. full at 585 LSB
    Charging at 239 LSB (204 mA).
    BCICTL2=0x3ff
    battery-info.flags=0x00000000
    bat_compal_e88_chg_state=0
BAT-ADC: 605   6   0   0 1023 373 383 276
    Charger at 51 mV.
    Battery at 4136 mV.
    Charging at 0 mA.
    Battery capacity is 100%.
сейчас скину фото как надо замкнуть контакты на плате мобилы)))
Подскажите в чём суть таких манипуляций с файлами в терминале?

Рад был помочь.Какие манипуляции?То что я тебя разные команды на загрузку прошивки кидал?
 
Ответить с цитированием

  #135  
Старый 07.01.2019, 00:34
kuzmich9023
Новичок
Регистрация: 05.01.2019
Сообщений: 0
С нами: 3870507

Репутация: 0
По умолчанию
Даа. Я в Lunux осваиваюсь пока вот и спрашиваю. В чём отличие команд что вы мне предлагали выполнить от тех что указанны на первой странице в "мануале"?
.compalarm.bin
.highram.bin
 
Ответить с цитированием

  #136  
Старый 07.01.2019, 00:59
House26
Новичок
Регистрация: 13.07.2018
Сообщений: 0
С нами: 4124485

Репутация: 0
По умолчанию
Цитата:

kuzmich9023 сказал(а):

Даа. Я в Lunux осваиваюсь пока вот и спрашиваю. В чём отличие команд что вы мне предлагали выполнить от тех что указанны на первой странице в "мануале"?
.compalarm.bin
.highram.bin

Ну я так,бегло сейчас мануал пробежал.По сути ничем.Различие лишь в том,что он сделал ссылку на osmocon и добавил её в переменную PATH .

Код:


Код:
cd ~/osmocombb/master/src/host/osmocon/
mkdir osmocon-link
ln -s ~/osmocombb/master/src/host/osmocon/osmocon osmocon
Да и параметры
-m c123xor
-p /dev/ttyUSB0
-c target/firmware/board/compal_e88/layer1.highram.bin
просто не в том порядке указаны.
Главное что заработало.
 
Ответить с цитированием

  #137  
Старый 07.01.2019, 10:23
House26
Новичок
Регистрация: 13.07.2018
Сообщений: 0
С нами: 4124485

Репутация: 0
По умолчанию
Цитата:

Golem777 сказал(а):

Доброго времени суток !! Подскажите пожалуйста где взять/скачать радужные таблицы !! Может есть у кого ?

Радужные таблицы доступны в интернете:

Files - A5/1 Decryption - SRLabs Open Source Projects
Index of /a51torrents/
 
Ответить с цитированием

  #138  
Старый 07.01.2019, 10:29
House26
Новичок
Регистрация: 13.07.2018
Сообщений: 0
С нами: 4124485

Репутация: 0
По умолчанию
Цитата:

Golem777 сказал(а):

спасибо ! Но эти ссылки не работают !!

Не знаю,с твоей стороны что то.Перехожу по ссылкам,обе рабочие.Попробуй через VPN или TOR зайти.
 
Ответить с цитированием

  #139  
Старый 07.01.2019, 10:35
House26
Новичок
Регистрация: 13.07.2018
Сообщений: 0
С нами: 4124485

Репутация: 0
По умолчанию
Цитата:

Golem777 сказал(а):

Ок ! Спасибо!! Возможно у меня что то! может на кракен тоже ссылочка имеется рабочая (на рабочий скрипт) ! Кто то юзал?

joswr1ght/kraken
 
Ответить с цитированием

  #140  
Старый 07.01.2019, 10:50
House26
Новичок
Регистрация: 13.07.2018
Сообщений: 0
С нами: 4124485

Репутация: 0
По умолчанию
Цитата:

Golem777 сказал(а):

Огромное спасибо

Пожалуйста,экспериментиру те.Можете потом свои результаты здесь на форуме рассказать,как все получилось.
 
Ответить с цитированием
Ответ
Страница 14 из 24 « Первая < 4 10 11 12 13 14 15 16 17 18 > Последняя »



« Предыдущая тема | Следующая тема »


Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
 


Быстрый переход




ANTICHAT ™ © 2001- Antichat Kft.

×

Создать сделку

Продавец: ник или ID

Название сделки:

Сумма USDT:

Срок сделки, дней:

Кто платит комиссию:

Условия сделки:

После создания сделки средства будут зарезервированы в холде до завершения сделки.

×

Мои сделки

Загрузка...
×

Сделка

Загрузка чата...